Dr. Dhananjay R. Mishra, born in Jaunpur, Uttar Pradesh on June 30, 1980. He has obtained his Bachelor's degree (Mechanical Engineering) from Amravati University (M.S.), Master's degree (Production Engineering, MECH.ENGG.) in 2007 from BIT, Durg of Pt. Ravi Shankar Shukla University, Raipur (C.G.), and Doctor of Philosophy in Mechanical Engineering from National Institute of Technology Raipur, Raipur on August 2016.

He has been associated with the Suprabha Industries Ltd., Lucknow, as an Assistant Production Manager, During 2002 -2004, as a Lecturer in Department of Mechanical Engineering of Rungta College of Engineering and Technology, Bhilai, C.G. (During Sept. 2005 to March 2006), as a Lecturer in Department of Mechanical Engineering of Shri Shankaracharya College of Engineering and Technology, Bhilai, C.G. (During March 2006 to July 2007), as an Assistant Professor in Department of Mechanical Engineering of Disha Institute of Management & Technology and also carried out the responsibility of the Academic Administrator (July 2007 to July 2012). Since July 2012, he is associated as an Assistant Professor (SG) in the Mechanical Engineering Department of Jaypee University of Engineering and Technology, Guna (M.P.).

He has established State Level Energy Park at DIMAT funded by MNRE through Nodal agency CREDA, and completed a research project titled "Determination of the parameters affecting heat transfer between the ground and fully or partially underground structures" sponsored by Chhattisgarh Council of Science and Technology at Disha Institute of Management & Technology, Chhattisgarh.

He has also successfully discharged responsibilities as an observer for different examination centers of CSVTU, AIEEE, and PMT.

He has published and reviewed more than 70 and 85 research articles in peer-reviewed international/national, journals/conferences respectively.

EDITOR OF PEER REVIEWED INTERNATIONAL JOURNAL

� International Journal of Thermodynamics & Catalysis, Gavin Publishers 5911 Oak Ridge Way, Lisle, IL 60532, USA.

� International Journal of Thermodynamics & Catalysis, Gavin Publishers 5911 Oak Ridge Way, Lisle, IL 60532, USA.

ASSOCIATE EDITOR OF PEER REVIEWED INTERNATIONAL JOURNAL

� International Journal of Applied Research (ISSN Print: 2394-7500 | ISSN Online: 2394-5869 | CODEN: IJARPF) [ Ref: AKINIK/LM/1]

� International Journal of Applied Research (ISSN Print: 2394-7500 | ISSN Online: 2394-5869 | CODEN: IJARPF)[ Ref: AKINIK/LM/1]

REVIEWER OF INTERNATIONAL JOURNALS:

1. Applied Thermal Engineering (ISSN: 1359-4311) 2. Acta Polytechnica (ISSN: 1805-2363) 3. Applied Energy (ISSN: 0306-2619) 4. AEJ - Alexandria Engineering Journal (ISSN: 1110-0168) 5. American Journal of Water Science and Engineering (AJWSE); (ISSN: 2575-1867) 6. Desalination (ISSN: 0011-9164) 7. Energy (ISSN: 0360-5442) 8. Environmental Science and Pollution Research (ISSN: 1614-7499) 9. Groundwater for Sustainable Development (ISSN: 2352801X) 10. Scientia Iranica (ISSN: 2345-3605) 11. SSRG International Journal of Mechanical Engineering (ID: SSRG- IJME-1086) 12. Technology and Economics of Smart Grids and Sustainable Energy (ISSN: 2199-4706) 13. International Journal of Application or Innovation in Engineering & Management (IJAIEM) (ID: 1289) (ISSN:2319-4847) 14. Journal of Water Process Engineering (ISSN: 2214-7144) 15. Journal of the Brazilian Society of Mechanical Sciences and Engineering (ISSN: 1678-5878) 16. Journal of Thermal Analysis and Calorimetry (ISSN: 1388-6150) 17. Journal of Energy Storage (ISSN: 2352152X) 18. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences (ISSN: 2289-7879) 19. Multidiscipline Modeling in Materials and Structures (ISSN: 1573-6105) 20. Materials Science for Energy Technologies (ISSN 2589-2991) 21. Process Safety and Environmental Protection (ISSN: 0957-5820)

Ph.D. Supervision�s:

Defended:

1. Mr. Girish Dutt Gautam (153202) Experimental investigations and multi-response optimization inpulsed Nd:YAG laser cutting of novel FRP composite materials, Jaypee University of Engineering & Technology, Guna, thesis defended on 15th Feb., 2020.

2. Mr. Mayank Sharma (14319006) Simulation of Heat and Mass Transfer within the Novel Solar Stills, National Institute of Technology Raipur, thesis defended on 9th Mar., 2021.

3. Mr. Pankaj Dumka (173E001) Desalination of water using modified form of the single-slope solar still and double slope long still, Jaypee University of Engineering & Technology, Guna, thesis defended on 3rd April., 2021.

Ongoing:

1. Mr. Manoj Dubey (153205) Solar Thermal Applications, Jaypee University of Engineering & Technology, Guna.

2. Mr. Amiya Kumar Sahoo (193E001) Optimization of process parameters of an advanced machining process, Jaypee University of Engineering & Technology, Guna

M.Tech. Thesis Guidance

1. Mayank Garg (162E001), "Multi-response optimization of EDDM for a Hastelloy", defended in May 2018) 2. Vivek Tiwari (142407),"Parametric optimization of EDM for Monel K-500 material", defended in 2016. 3. Priyaranjan Sharma(112603), "Multi-Response Optimization of EDM Parameters for INCONEL 600 and INCONEL 718", defended in 2013.

Publication details google profile link

Book Chapter

1. Dhananjay R. Mishra, Mehendra Singh Sodha, Amrit Dixit, "Validation of basis of experimental simulation of heat transfer between a building and surrounding earth", Proceedings of International Conference on Energy Security, Global Warming and Sustainable Climate, Solaris-2012 (ISBN 978-93-82332-03-9)

2. Gautam, G.D. and Mishra, D.R., 2020, "Pulsed Nd:YAG laser cutting: Accuracy improvement and parametric influences", Accuracy Enhancement Technologies for Micromachining Processes, Book Series: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland AG, Editors: Kibria, G. and Bhattacharyya, B. (In-press)

Patents Filed

Titled as "Earth solar still augmented with the sandbag and black dust cloth covered perforated floating plate", Docket No. 67733, CBR Number:28200 and Ref. Patent Number:201924054660,.

Journals/Conferences:

1. P. Dumka, A. Jain, D.R. Mishra, Energy, exergy, and economic analysis of single slope conventional solar still augmented with an ultrasonic fogger and a cotton cloth, J. Energy Storage. 30 (2020) 101541. https://doi.org/10.1016/j.est.2020.101541.

2. R. Chauhan, S. Sharma, R. Pachauri, P. Dumka, D.R. Mishra, Experimental and theoretical evaluation of thermophysical properties for moist air within solar still by using different algorithms of artificial neural network, J. Energy Storage. 30 (2020) 101408. https://doi.org/10.1016/J.EST.2020.101408.

3. D.R. Mishra, A. Bajaj, R. Bisht, Optimization of multiple kerf quality characteristics for cutting operation on carbon�basalt�Kevlar29 hybrid composite material using pulsed Nd:YAG laser using GRA, CIRP J. Manuf. Sci. Technol. (2020). https://doi.org/10.1016/j.cirpj.2020.05.005.

4. G.D. Gautam, D.R. Mishra, Multiple kerf quality optimization in Nd : YAG laser cutting of BFRP composite using grey relational based genetic algorithm, FME Trans. 48 (2020) 636�650. https://doi.org/10.5937/fme2003636G

5. P. Dumka, D.R. Mishra, An estimation of the distillate output from a CSS based on multivariable regression analysis, Int. J. Ambient Energy. 0750 (2020). https://doi.org/10.1080/01430750.2020.1736625.

6. M. Dubey, D.R. Mishra, Experimental evaluation of double slope solar still augmented with ferrite ring magnets and a black cotton cloth, Int. J. Ambient Energy. 0750 (2020). https://doi.org/10.1080/01430750.2020.1722746.

7. P. Dumka, D.R. Mishra, Comparative experimental evaluation of conventional solar still (CSS) and CSS augmented with wax filled metallic finned-cups, FME Trans. 48 (2020) 482�495. https://doi.org/10.5937/FME2002482D.

8. R. Chauhan, P. Dumka, D.R. Mishra, Modelling conventional and solar earth still by using the LM algorithm-based artificial neural network, Int. J. Ambient Energy. (2020). https://doi.org/10.1080/01430750.2019.1707113.

9. D.R. Mishra, G.D. Gautam, D. Prakash, A. Bajaj, A. Sharma, R. Bisht, S. Gupta, Optimization of Kerf Deviations in Pulsed Nd : YAG Laser Cutting of Hybrid Composite Laminate Using GRA, FME Trans. 48 (2019) 109�116. https://doi.org/10.5937/fmet2001109M.

10. Pankaj Dumka, Dhananjay R. Mishra, �Performance evaluation of single slope solar still augmented with the ultrasonic fogger�, Energy, Elsevier, 190, 116398,Oct.2019 https://doi.org/10.1016/j.energy.2019.116398

11. Pankaj Dumka, Aman Sharma, Yash Kushwah, Aman Singh Raghav, Dhananjay R. Mishra, �Performance evaluation of single slope solar still augmented with sand-filled cotton bags�, Journal of Energy Storage, Vol. 25, No. 100888, October 2019. https://doi.org/10.1016/j.est.2019.100888

12. Girish Dutt Gautam, Dhananjay R. Mishra, Firefly algorithm based optimization of kerf quality characteristics in pulsed Nd : YAG laser cutting of basalt fiber reinforced composite, Composite Part B: Engineering 176 (2019) 107340. https://doi.org/10.1016/j.compositesb.2019.107340

13. Dhananjay R. Mishra, Experimental Evaluation of Shape Factor of Axis Symmetric Sunken Structures, Scientia Iranica https://doi.org/10.24200/sci.2019.50181.1559

14. Girish Dutt Gautam, Dhananjay R. Mishra, Dimensional accuracy improvement by parametric optimization in pulsed Nd:YAG laser cutting of Kevlar‑29/basalt fiber-reinforced hybrid composites, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vo. 47, Issue 7, pp.284:1-22. https://doi.org/10.1007/s40430-019-1783-y

15. Mayank Sharma, Anil Kr. Tiwari, Dhananjay R. Mishra, Experimental evaluation of a long still with Galvanized Iron sheet as condensing cover at different basin water flow rate : study of heat and mass transfer, International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2019.1621199

16. Dhananjay R Mishra, Hrishi Jain, Nishant Kumar, Mahendra Singh Sodha, Experimental evaluation of solar integrated water heater, Scientia Iranica, https://doi.org/10.24200/SCI.2019.50071.1510

17. Pankaj Dumka, Dhananjay R. Mishra, Influence of salt concentration on the performance characteristics of passive solar still, International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2019.1611638

18. Girish Dutt Gautam, Dhananjay R. Mishra, Evaluation of geometrical quality characteristics in pulsed Nd:YAG laser cutting of Kevlar-29/Basalt fiber reinforced hybrid composite using grey relational analysis based genetic algorithm, FME Transactions, Vol. 47, No. 3., pp.560-575, 2019, https://doi.org/10.5937/fmet1903560G

19. P. Dumka, Y. Kushwah, A. Sharma, D.R. Mishra, Comparative analysis and experimental evaluation of single slope solar still augmented with permanent magnets and conventional solar still, Desalination. 459 (2019) 34�45. https://doi.org/10.1016/j.desal.2019.02.012

20. Manoj Dubey, Dhananjay R. Mishra, Experimental and Theoretical evaluation of double slope single basin solar stills: A study of heat and mass transfer. FME Transactions 2019;47(1):101�10. https://doi.org/10.5937/fmet1901101D

21. Mayank Sharma, Anil Kr.Tiwari, Pankaj Dumka, Dhananjay R. Mishra, Performance evaluation of long still for the utilization of industrial hot waste water. Journal of Energy Storage 2018;20:485�91. https://doi.org/10.1016/J.EST.2018.10.023

22. Pankaj Dumka, Dhananjay R. Mishra, Experimental investigation of modified single slope solar still integrated with earth (I) &(II):Energy and exergy analysis. Energy 2018;160:1144�57. https://doi.org/10.1016/j.energy.2018.07.083

23. Mayank Sharma, Anil Kr. Tiwari, Dhananjay R. Mishra, Sand Bed Solar Stills for Coastal Areas : Studying Heat and Mass Transfer using ANN Model. International Journal of Engineering Research in Mechanical and Civil Engineering 2018, 3 (1): 497�501. https://doi.org/01.1617/vol5/iss1/pid04168

24. Pankaj Dumka, Dhananjay R. Mishra, Energy and exergy analysis of conventional and modified solar still integrated with sand bed earth: Study of heat and mass transfer, Desalination 437, 15-25. https://doi.org/10.1016/j.desal.2018.02.026

25. K. Hidouri, D. R. Mishra, A. Benhmidene, and B. Chouachi, Experimental and theoretical evaluation of a hybrid solar still integrated with an air compressor using ANN, Desalination and Water Treatment, vol. 88, pp. 52�59, September 2017. https://doi.org/10.5004/dwt.2017.21333

26. K. Hidouri, A. Benhmidene, B. Chouachi, D. R. Mishra, and A. Houas, Adsorption of Phenolic Compounds on Activated Carbon DSAC36-24, World Academy of Science, Engineering and Technology, vol. 11, no. 8, pp. 601�606, Aug., 2017. https://doi.org/10.1999/1307-6892/70701

27. Khaoula Hidouri, Dhananjay R Mishra, Experimental Evaluation of Influence of Air Injection Rate on a Novel Single Slope Solar Still Integrated with an Air Compressor, Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering, Vol. 17, Issue 3(Ver. 1), pp. 30�39, Aug, 2017.[ISSN: 2249-4596]

28. Dhananjay R. Mishra and Anil Kr. Tiwari (2017) Productivity enhancement of single slope solar still using ground energy, Journal of Scientific and Technical Research, vol. 6, no.2 pp. 28-34. [ISSN:2278-3350]

29. Krishna Murari, Dhananjay R. Mishra, Dharmendra K. Shukla, Birendra Jha, Jatin Talwar (2017) Performance evaluation of concrete containing polypropylene and recron fiber as additive, Journal of Scientific and Technical Research, vol. 4, no.2, pp. 44-49. [ISSN:2278-3350]

30. Mayank Sharma, Anil Kr. Tiwari and Dhananjay R. Mishra, A review on desalination of water using single slope passive solar still, International Journal of Development Research Vol. 06, Issue, 11, pp.10002-10012, November, 2016.[ISSN:2230-9926]

31. Dhananjay R. Mishra, Anil kr. Tiwari, Mahendra Singh Sodha, Mathematical modeling and evaluation of new long single slope still for utilization of hot waste water, Applied Thermal Engineering, vol. 108, pp. 353�357. Sep., 2016 doi.org/10.1016/j.applthermaleng.2016.07.153 (SCI) [ISSN Online:1359-4311]

32. Vivek Tiwari, Dhananjay R. Mishra, Multi response optimization of EDM parameters for MONEL K-500, International Journal of Advances in Production and Mechanical Engineering, vol.2 issue 4, pp. 53-60. July, 2016. [ISSN:2394-6210]

33. Mahendra Singh Sodha, Dhananjay R. Mishra and Anil Kr. Tiwari (2014) Solar Earth water Still for Highly Wet ground, Journal of Fundamentals of Renewable Energy and Applications, vol.4 Issue 1, e103. 3. https://doi.org/10.4172/2090-4541.1000e103

34. Priyaranjan Sharma, Sujit Singh and Dhananjay R. Mishra (2014) Electrical Discharge Machining of AISI329 Stainless Steel Using Copper and Brass Rotary Tubular Electrode, International Conference on Advances in Manufacturing and Material Engineering, AMME2014. Procedia Material Science. Vol. 5, pp. 1771-1780. https://doi.org/10.1016/j.mspro.2014.07.367

35. Dhananjay R. Mishra and Anil K. Tiwari (2013) Effect of Coal and Metal Chip on the Solar Still, Journal of Scientific and Technical Research , Vol. 3, No. 1, pp 1-6 [ISSN:2230-9926]

36. Priyaranjan Sharma, Sujit Singh, Dhananjay R. Mishra and Dev Ranjan Sharma, (2012) Optimization of Multi-Response Parameters of Inconel 600 on EDM using Rotary Brass Hollow Tubular Electrode by Taguchi Method , Journal of Scientific and Technical Research, Vol. 2, No. 2, pp 20-32. [ISSN:2230-9926]

37. Dhananjay R Mishra and Anil Kumar Tiwari (2012). Sunken Effect On Buildings Structures. i-manager�s Journal on Mechanical Engineering, 2(2), 41-45. https://doi.org/10.26634/jme.2.2.1570

38. Dhananjay R. Mishra, Utilization of nanomaterial�s for enhancing the productivity of solar distiller units, World Nanotechnology 2019, Dubai, UAE.( APRIL 15-17, 2019)

39. Siddharth Gupta, Abhay Bajaj, Abhishek Sharma, Divyanshu Prakash, Rajat Bisht, Girish Dutt Gautam, Dhananjay R. Mishra, �Multi-Response Parametric optimization in Pulsed Nd: YAG Laser Cutting of Kevlar-29/Basalt/Glass fiber composite by Using Genetic Algorithm�, 7th International Conference on �Wallop of Globalization in Engg-Medi-Sci-Agri-Pharm-Tech Research�, on 27-28 February 2019

40. Abhishek Sharma, Abhay Bajaj, Divyanshu Prakash, Rajat Bisht, Siddharth Gupta, Girish Dutt Gautam and Dhananjay R Mishra, "Multiple kerf quality optimization in Nd:YAG laser cutting of Basalt/Kevlar-29/Carbon fiber composite using grey relational analysis", 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST 2019) with Theme of Advances in Mechanical Engineering, 18-22 Feb, 2019 at National Institute Of Technology,Kurukshetra.

41. Siddharth Gupta, Abhay Bajaj, Abhishek Sharma, Divyanshu Prakash, Rajat Bisht, Girish Dutt Gautam and Dhananjay R. Mishra,"Simultaneous Optimization of kerf quality characteristics in Pulsed Nd: YAG Laser Cutting of Hybrid Composites by Using Genetic Algorithm", 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST 2019) with Theme of Advances in Mechanical Engineering, 18-22 Feb, 2019 at National Institute Of Technology,Kurukshetra.

42. Manoj Dubey, Kunal, Prajal Jain, Prince Kumar, Shivam Vats, Dhananjay R. Mishra , �Performance analysis of single slope solar still augmented with the roller and belt conveyor�, Solaris 2019�India Renewable Energy and Sustainable Climate 7-9 Feb, 2019 at at Jamia Millia Islamia - A Central University, Delhi.

43. Pankaj Dumka, Prince Goyal, Kedar Mishra, Gaurav Goswami, Manishi Parashar, Dhananjay R. Mishra , �Investigation of the performance of single slope solar still at different salt concentrations�, Solaris 2019�India Renewable Energy and Sustainable Climate 7-9 Feb 2019 at Jamia Millia Islamia - A Central University, Delhi.

44. Pankaj Dumka, Dhananjay R Mishra, �Techno-economic analysis of CSS and MSSIE for sea coastal area�, 6th World Conference on Applied Science, Engineering and Technology (WCASET-18) 2nd & 3rd January, 2018 GOA, INDIA. WCASET_37805 [ISBN:978-81-932966-9-1]

45. Mayank Sharma, Anil Kr. Tiwari, Dhananjay R Mishra, �Sand Bed Solar Stills for Coastal Areas: Studying Heat and Mass Transfer using ANN Model�, 6th World Conference on Applied Science, Engineering and Technology (WCASET-18) 2nd & 3rd January, 2018 GOA, INDIA WCASET_79341.[ISBN:978-81-932966-9-1

46. Mayank Sharma, Anil Kr. Tiwari, Dhananjay R Mishra , �Experimental evaluation of single basin solar still coupled with the ground earth surface using artificial neural network�, in India Renewable Energy Sources for Sustainable Climate Solaris 2017 at Varanasi, India, on 7-9 Feb 2017.

47. Vivek Tiwari and Dhananjay R. Mishra, �Multi response optimization of EDM parameters for MONAL K-500�, 19th International Conference on Production, Mechanical and Automobile Engineering (ICPMAE-2016), held in Gujrat, 19 -20 June, 2016.

48. Dhananjay R Mishra and Anil Kr. Tiwari, �Shape factor of fully buried axis symmetry structures using thermal simulation method�, 4th International conference on Challenges in Environmental Science and Technology, IC-CEST-2016, 27-28 Feb., 2016, SVNU, Sagar, [Ref./SVNU/2016/PP-09].

49. Vivek Tiwari and Dhananjay R. Mishra, �Response optimization of EDM parameters for Monel K-500�, 4th International conference on Challenges in Environmental Science and Technology, IC-CEST-2016, 27-28 Feb., 2016, SVNU, Sagar, [Ref./SVNU/2016/PP-137].

50. Sumit Gandhi and Dhananjay R. Mishra, �Review on stepped spillway and baffle blocks as energy dissipater in gravity Dams�, 4th International conference on Challenges in Environmental Science and Technology, IC-CEST-2016, 27-28 Feb., 2016, SVNU, Sagar, [Ref./SVNU/2016/PP-138].

51. Dhananjay R. Mishra and Anil Kr. Tiwari, �Performance Evaluation of conventional and sand bed ground solar still and effect of covering by black polythene sheet and coal powder on nearby surfaces of sand bed solar still�, 3rd International conference on Recent Trends in Science & Technology, IC-RTST-2015, 27th and 28th Feb., 2015. SVNU, Sagar.

52. Anil Kr. Tiwari and Dhananjay R. Mishra, �Effect of Covering by Black Polythene Sheet and Coal Power on Nearby Surfaces of Sand Bed Solar Still: Studying Heat and Mass Transfer�, HEFAT 2014 10Th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 14th -16th July 2014 Orlando, Florida EFFCET.

53. Dhananjay R. Mishra, Atul Bhattad and Nitin K. Samaiya, �Electrical stimulation of trapezoidal canals�, National conference on Advance materials at Sharda University, Aug 8-9, 2014 .

54. Dhananjay R. Mishra, �Experimental simulation of building and surrounding earth�, Proceedings of ESS-2013. Organized by Department of civil Engineering at Jaypee University of Engineering and Technology, Guna during 30th -31st March, 2013.

55. Dhananjay R. Mishra, Mahendra Singh Sodha and Amrit Dixit, �Validation of the basis of experimental simulation of heat transfer between a building and surrounding earth�, Solaris 2012, an international conference on Energy security, Global warming and sustainable Climate held at BHU during 7Th- 9Th February, 2012.

56. D.R. Mishra, V. Jha, A. Chandrakar, R. Sahu, A. Masand and S.L. Sahu, �Ground Earth � Still�, Proceedings of Green Technology for Sustainable Development in Mechanical Engineering & Mechatronics Engineering, AICON 12:47-50, 2012.

Invited Talks

1. An invited talk on "Utilization of nanomaterial's for enhancing the productivity of solar distiller units", has delivered in World Nanotechnology 2019 Conference on 15th April, 2019 at Dubai, UAE.

2. An invited talk on "An overview on active and passive solar stills", has delivered in 6th International Conference on "Pollution and It's Control through Agriculture, Pharmacy, Science and Technology" on 27-28 February 2018.

3. An invited talk on "Solar water desalination techniques: An overview", has delivered in 4th International Conference on Challenges in Environmental Science and Technology, IC-CEST-2016, at SVNU, Sagar on 27th-28th February, 2016.

4. An invited talk on "Performance evaluation of sand bed single slop solar stills", has delivered in 3rd International Conference on Recent Trends in Science & Technology, IC-RTST-2015, at SVNU, Sagar on, 27th-28thFebruary, 2015.

Short Term Training:

1. A short-term training on "Power Generation Overview 660MW supercritical thermal power plant", organized by NTPC Limited (A Government of India Enterprise) at Power Management Institute from 17.12.2012 to 30.12.2012.

2. A short-term training on "660MW simulator training program" organized by NTPC Limited (A Government of India Enterprise) at Power Management Institute from 17.12.2012 to 30.12.2012.

Workshop/ training organized

� One day workshop organized on "Support for Entrepreneurial and Managerial Development for SMEs through Incubators", a component of National Competitiveness Programme in collaboration with MSME, Indore at Jaypee University of Engineering and Technology, Guna on 09th March, 2016.